2024 Summer Semester Flying Robot Project Team E Article 2May 22, 2024


There were two main tasks. The first was to make mounts for joining the fuselage and wings. After making the mount out of MDF, I made a proper version out of veneer and confirmed that it would hold the spars firmly and allow us to change the angle of attack of the wings.
The second step was to make the left wing. After attaching flanges to the cut-out ribs, the web was attached, and finally 3mm styrene board was attached by bending it with a hairdryer. In the process of making the aileron, we confirmed that the aileron was free to move.