REPORT

2019 Spring Semester Flying Robot Project Team D Article 10June 26, 2019

620

We couldn’t finish soldering in time during last class, so we continued doing it in this class time.

Basically, what we are doing now is almost as same as the thing that we were doing in the last time, but today we are making some parts which connects frames of the multicopter.

We are getting accustomed to using CAD tools such like Fusion 360, so the speed of our development is faster than before, we assume.

We’ve just finished soldering and making parts by laser cutter.
We are going to assemble the multicopter in the next class.
前回の授業時間内にハンダ付けをしなければならない箇所が見つかったが授業時間内に作業を終えることができなかったので、今回もハンダ付け作業を行った。

基本的には前回と作業内容は変わらないので特に新たに書くことはないが、今日はさらにレーザーカッターを用いて機体フレームをつなぎ合わせる部品の製作を進めた。

次第にFusion360などを用いたCAD設計にも慣れてきて、作業の進行スピードが上がってきているように感じる。

今回はハンダ付け作業を完全に終えることができて、さらにレーザーカッターでの部品の出力も終了したので、次回からはマルチコプターの機体の組み立て作業に入っていきたい。

|